SlidePlane · Flat-slide humidity chamberEarly Access
Incubate slides flat. Move them all in one lift.
Flat, warm, humid incubations — without slide-by-slide transfers.
SlidePlane holds up to 12 slides flat at the same height, keeping small reagent drops in place during incubation. Transfer the full set of slides to the wash tray together, or wash in the chamber itself.
Early Access prices
SEK / EUR · excluding VAT
| SlidePlane configuration | Price (excl. VAT) |
| Basic · 10 slides | 1,295 SEK / €118 |
| Basic · 12 slides | 1,495 SEK / €136 |
| Extended · 10 slides | 1,895 SEK / €172 |
| Extended · 12 slides | 2,095 SEK / €190 |
Extended = Basic + 600 SEK (approximately €54); includes a separate wash tray with light-tight lid.
01
Flat and levelSlides lie at the same height, supporting even warming and controlled small-volume incubations.
02
All slides in one liftMove the entire run between incubation and washing without individual transfers using forceps.
03
Keep the chamber warmLeave the humid chamber in an oven or incubator so the next step starts warm and humid.
04
Keep washes darkThe Extended kit adds a separate wash tray with a light-tight lid to limit light exposure between fluorescent staining cycles.
A run in three steps
01Load. Lay 10 or 12 standard slides flat and add reagent to each.
02Incubate. Close the gravity lid and incubate at room temperature or in a pre-warmed humid chamber (up to 45 °C).
03Wash. Transfer all slides in one lift to the wash tray, or wash in the chamber itself. Use the covered wash tray between fluorescent cycles to minimise light exposure.
Designed for repeated cycles: repeat incubation and washing for IHC, IF, multiplex IF, HCR and enzymatic workflows such as PLA or TUNEL. The gravity lid uses a labyrinth edge to help maintain humidity and reduce light exposure during fluorescence steps.
Early Access specifications
Formats10 or 12 slides
SlidesStandard 76 × 26 mm
ApplicationsIHC, IF, mIF, HCR, PLA, TUNEL
Temperature+4 °C to +45 °C
HumidityWetted pad in a closed chamber
Wash volumeApprox. 210 mL (12-slide tray)
FootprintApprox. 22 × 19 cm; 3.3 cm high with lid
Material / colourPETG · blue
Basic kitHumidity chamber with lid
Extended kitAdds wash tray with light-tight lid
StatusEarly Access · available to order
Order SlidePlane for your labChoose Basic or Extended at introductory Early Access pricing. Request a quotation for your preferred configuration.
Request a Quote
Research use only. Not for use in diagnostic procedures.